The EC Apparatus 600-90 Electrophoresis Power Supply is made with several features to enable proper output delivery for lab experiments. The device is relatively easy to use, easy to set up and work with. It is made with several features on it that make monitoring activities of the device easy by just observing what is going on and what the device is indicating in its surface notification features. On its surface, there is a volt adjustment knob used by the operator to change the voltage and use the level necessary for the specific experiment. It has a yellow light that indicates the limit of volts so that the same is not exceeded. The volt supplied is displayed on the volts display.
Further, the device enables the operator to monitor the current flowing into the device though the milliamps display, the same is adjustable using the milliamps adjustment knob located on the surface of the device. The device is also enabled to indicate the limit of current though the yellow limit light on the surface, close to the current display.
The device has a way of controlling the wattage, the same can be adjusted by the operator though the watts adjustment knob on the surface of the device. The timing of the device can also be adjusted though manipulating the timer arrows into either up or down to set the same to the required time specifications for the experiment.
Its maximum wattage is 400V, maximum power is 300W, and maximum current is 300miliamps while the temperature range is between 0-30 degrees centigrade. The timer can operate between zero to 1hour 59 minutes.